Judging from the current situation, if you want to process CNC machined parts, then probably most people want to know the actual steps of these machining parts. When machining parts, how to process them efficiently?
First, choose the right tools.
It is recommended that you choose the appropriate tools when machining CNC machining parts. Usually, in general, relevant analysis should be carried out according to the drawing paper or technical requirements of all parts, as well as all parts materials, so that a more reasonable processing technology can be developed. At present, we must choose the most suitable tool according to the current processing technology.
Second, write the processing program
When writing CNC machining parts for actual program writing, it is necessary to write and calibrate the machining program according to the current current process requirements and blank materials, as well as all the characteristics. If it is accurate without any precise numerical control device, then in this case again, after re-checking, it may occur that the process of machining simulation machining occurs.
Third, check to see if the size conforms to the drawing requirements
In the actual machining process of CNC machined parts, after ensuring that all machining is normal, test cutting can be performed at low speed. Check the existing part size condition conditions, look at these to make sure the part size meets the same requirements, and modify the tool patch according to the actual situation.
What are the processing steps of CNC machining parts? According to the above conditions, the precision machining of CNC machined parts can be realized.